Can resistive or capacitive touch be customized for this 4.3 inch vertical display?

Standard module comes without touch; resistive or capacitive touch overlay can be customized according to customer project demands.

Current location:Home > Products > TFT LCD screen > Assembled TFT LCD Screen > JGT043W40ON06 4.3 Inch IPS Portrait Industrial TFT Display 480×800 RGB Screen

JGT043W40ON06 4.3 Inch IPS Portrait Industrial TFT Display 480×800 RGB Screen

Description:

JGT043W40ON06 4.3'' IPS portrait industrial TFT with 480×800 vertical resolution,360cd/m2 backlight,40PIN RGB,ST7701,-20~70℃,2.62mm thin for handheld,medical & IoT devices.

Product Model:JGT043W40ON06
Manufacturer:Private Enterprise
Update time:2026-07-01
Visits:11

Download Contact Us

Category

Introduction

JGT043W40ON06 4.3 Inch IPS Portrait Industrial TFT Display 480×800 RGB Screen

For industrial handheld units, smart meters, medical testers, vehicle auxiliary equipment and IoT terminals, compact portrait LCD modules serve as lightweight core display components. JGT043W40ON06 is a standard 4.3-inch IPS portrait TFT display with native 480×800 vertical resolution, uniform 5S2P 360cd/m² backlight, universal 40PIN RGB parallel interface, dedicated ST7701 driver IC and -20~70℃ industrial temperature range. The ultra-thin 2.62mm design delivers cost-effective vertical display solutions for small & medium embedded devices.

JGT043W40ON06 Full Specification Parameters

Parameter Item	Specifications	Product Advantages
Model Number	JGT043W40ON06	Standard 4.3-inch IPS portrait TFT without touch, mature RGB scheme with stable mass supply
Display Type	TFT IPS Portrait Screen (Without Touch)	Native vertical format, no software rotation required to reduce MCU computing load
Display Size	4.3 Inch	Optimized for narrow slots on handheld devices & compact cabinets with high space utilization
Resolution	480×800 Vertical	Vertical pixel layout for layered parameter lists without crowded UI interface
Panel Feature	IPS Hard Panel, Full Viewing Angle	No whitening or color shift from all viewing directions for consistent data reading by multiple operators
Backlight Brightness	360cd/m²	Soft & clear visibility under clinic and regular workshop indoor lighting conditions
LED Structure	5S2 LED Backlight Array	Even light output with slow brightness decay during long-term continuous operation
Signal Interface	RGB Parallel Interface	Universal display protocol compatible with 8-bit & 32-bit MCU/ARM mainboards
FPC Pins	40PIN Standard FPC Cable	Standard pin definition without adapter boards to shorten hardware R&D cycle
Driver IC	ST7701	Dedicated vertical screen driver with complete firmware, smooth display without ghosting or stuttering
Operating Temp.	-20℃ ~ 70℃	Stable non-flickering performance for year-round indoor industrial continuous operation
Storage Temp.	-30℃ ~ 80℃	LCD & backlight undamaged during long-distance logistics & warehouse temperature fluctuation
Overall Dimension	60.86×102.57×2.62mm	2.62mm ultra-thin module, easy embedding into narrow handheld housings
VA View Area	57.50×95.40mm	Narrow bezel design delivers larger visible area within same module footprint
AA Active Area	56.16×93.60mm	Regular pixel layout without edge cropping for UI design
Touch Option	No Touch (Custom Resistive/Capacitive TP Available)	Pure display design with low failure rate; touch overlay customizable without mold modification
Application Scenarios	Handheld Industrial / Smart Meter / Medical / Vehicle / IoT Terminal	Economical universal vertical display module for small vertical embedded equipment

1. Native 480×800 Vertical Resolution Without Screen Rotation

JGT043W40ON06 adopts exclusive vertical 480×800 pixels to stack parameters, monitoring data and operation menus vertically. It eliminates screen rotation logic to reduce MCU load. The compact 4.3-inch portrait form factor fits handheld testers, side-mounted meters and vertical control panels with minimal housing mold changes, delivering sharp text for close-range operation.

2. IPS Hard Panel Full Wide View Without Dark Corners

Equipped with IPS hard LCD substrate, it offers far wider viewing range than standard TN panels. Brightness and color stay consistent under steep vertical & horizontal tilt angles. No dark shadows or color distortion for multi-operator workshop consoles, handheld side operation and wall-mounted meters to reduce visual fatigue during long monitoring shifts.

3. Uniform 5S2P 360cd/m² Backlight For Indoor Use

Built-in 5-series 2-parallel LED backlight array delivering stable 360cd/m² brightness without gray reflection under household, clinic and regular workshop lighting. Homogeneous illumination slows brightness degradation for stable clear visuals during 24/7 non-stop equipment operation.

4. 40PIN RGB + ST7701 Driver Low Integration Barrier

Standard 40PIN RGB FPC matched with dedicated ST7701 vertical screen driver IC, fully compatible with mainstream MCU and ARM boards with complete demo codes to shorten project development cycles. Stable parallel signal transmission resists EMI interference inside control cabinets without screen ripple or flicker.

5. Ultra Thin 2.62mm Module For Lightweight Handheld Design

Only 2.62mm thick with slim 60.86×102.57mm outline, it easily fits narrow cavities of handheld detectors, wall-mounted small meters and vertical vehicle control boxes. Standard non-touch version allows separate resistive/capacitive touch addition without mold redesign.

6. Wide Compatibility With Vertical Embedded Devices

Handheld Industrial Units

Field inspection instruments, portable PLC debuggers, vertical data acquisition handheld displays.

Smart Meters

Power & environmental monitoring wall meters, small cabinet status displays.

Portable Medical Devices

Portable diagnostic monitors, low-flicker screens for vital sign testers.

Vehicle Auxiliary Equipment

Vehicle door strip control panels, compact construction machinery vertical status screens.

IoT Terminals

Smart home access control panels, vertical displays for data collection gateways.

JGT043W40ON06 Frequently Asked Questions

Q1: What are operating & storage temperature ranges of JGT043W40ON06?

A: Operating: -20℃ ~ 70℃; Storage: -30℃ ~ 80℃, stable performance under cold workshops & high-temp sealed cabinets.

Q2: What interface and driver IC does this 4.3 inch portrait TFT adopt?

A: Equipped with 40PIN standard RGB parallel FPC, paired with dedicated ST7701 vertical screen driver IC, compatible with most mainstream industrial mainboards directly.

Q3: Is 360cd/m² brightness sufficient for indoor factory & clinic environments?

A: Uniform 5S2P backlight without dark patches, device data readable clearly under standard indoor ambient light without extra fill light.

JGT043W40ON06 is a compact 4.3-inch IPS vertical industrial TFT display with seven core advantages: native 480×800 vertical resolution, IPS full wide viewing angle, uniform 5S2P 360cd/m² backlight, universal 40PIN RGB interface, stable ST7701 driver, -20~70℃ industrial temp range and ultra thin 2.62mm thickness. Widely compatible with handheld industrial units, smart meters, medical instruments, vehicle equipment and IoT embedded terminals. Mature solution, stable panel quality, competitive bulk price, sample testing & touch customization services available.