JGT099W10ON01 0.99" vertical IPS TFT LCD,GC9D01 IC,3/4 wire SPI 10PIN FPC,400nits brightness,1.5mm ultra-thin,-20~70℃ for smart bands,TWS earbud cases & MCU devices.

Product Model:JGT099W10ON01
Manufacturer:Private Enterprise
Update time:2026-07-09
Visits:12

Download Contact Us

JGT099W10ON01 0.99 Inch Ultra Thin IPS Vertical Wearable TFT Screen | SPI Mini Industrial LCD Module

For smart bracelets, TWS earbud charging cases, miniature detectors and MCU development boards, ultra-small vertical TFT panels serve as lightweight status display components. JGT099W10ON01 adopts IPS LCD substrate with native vertical layout, GC9D01 dedicated driver, 3/4 wire compatible 10PIN compact FPC, 400cd/㎡ high brightness LED backlight, 2.8V low power input and -20~70℃ wide temperature range. The ultra-thin 1.5mm body creates a low-cost display solution for tiny wearable embedded devices.

JGT099W10ON01 Full Specification Parameters

Parameter Item	Specifications	Product Advantages
Model Number	JGT099W10ON01	Standard 0.99 inch vertical IPS screen, open-source GC9D01 codes, stable mass supply for wearables
Product Type	TFT IPS Vertical Screen (No Touch)	Native vertical layout, no screen rotation required to reduce MCU computing load
Display Size	0.99 Inch	Ultra-small cutout for smart bands, earbud boxes & mini sensors
Panel Feature	IPS Full View LCD	No whitening or color shift when viewed from all angles for wearable use
Backlight Brightness	400cd/㎡ High Brightness LED	Clear reading beside windows, uniform light with low long-term attenuation
Driver IC	GC9D01	Dedicated IC for tiny screens, compatible with STM32, ESP32, Arduino
Interface	3 / 4 Wire SPI Compatible	Occupies minimal MCU IO pins, simplifies hardware circuit design
FPC Cable	10PIN Ultra Short FPC	Compact cable saves internal space of earbuds & smart watches
Operating Voltage	2.8V Low DC	Direct single lithium cell power supply, eliminates boost chip & saves power
Operating Temp.	-20℃ ~ 70℃	No flicker or color drift for daily wearable long-term operation
Storage Temp.	-30℃ ~ 80℃	LCD & backlight won’t be damaged during logistics & storage
Overall Dimension	8.60×29.80×1.50mm	Ultra thin 1.5mm design fits narrow wearable cavities directly
Touch Option	No Touch (Custom Resistive/Capacitive TP Available)	Lower cost without touch; touch upgrade without mold redesign
Application Scenarios	Smart Band / TWS Earbud Case / Mini Detector / MCU / Mini Hardware	Low-cost vertical display module for ultra-small wearable embedded devices

1. Ultra Small 0.99 Inch Vertical Layout For Wearable Devices

JGT099W10ON01 features ultra compact 0.99 inch vertical IPS panel with tiny 8.6×29.8mm outline. Optimized UI layout for battery & heart rate data, no screen rotation needed to reduce MCU load, lowers new product mold cost for wearables.

2. IPS Full View + 400cd High Bright For Daily Wear

IPS wide angle technology ensures clear data reading when glancing at smart watches or earbud cases; 400nits brightness performs well beside indoor windows without extra lighting. LED backlight stays uniform with minor brightness decay over long usage.

3. GC9D01 Dedicated IC Lowers Development Threshold

GC9D01 tiny screen driver comes with full open-source firmware, easy porting to STM32, ESP32, Arduino. 3/4 wire SPI reduces IO occupation and shortens R&D cycle for wearable electronics.

4. 10PIN Ultra Short FPC Saves Internal Space

Integrated ultra-short 10PIN ribbon cable carries signal & backlight pins, avoids wire stacking inside earbud shells. No PCB revision required when upgrading old wearable products.

5. 2.8V Low Voltage & 1.5mm Ultra Thin Body

Single lithium battery 2.8V input cuts standby power consumption to extend wearable battery life. Only 1.5mm thickness fits tight enclosures, stable from -20℃ to 70℃ daily temperature range.

6. Full Coverage Of Mini Wearable Hardware

Smart Wearable Devices

Smart bands, kids mini watches, health monitoring wearables

TWS Audio Accessories

TWS earbud charging case status display screen

Miniature Detectors

Portable temperature & gas sensing testers

MCU Training Kits

0.99 inch display for single chip development boards

Mini Smart Hardware

Small remotes, portable atomizer indicator screens

JGT099W10ON01 Frequently Asked Questions

Q1: What operating temperature does this 0.99 inch IPS screen support?

A: Operating temperature -20℃ ~70℃, storage -30℃~80℃, stable for daily wearable devices.

Q2: Can this screen work with STM32 & ESP32 microcontrollers?

A: Yes, GC9D01 driver with full open source codes supports STM32, ESP32, Arduino and 51 MCU.

Q3: Is touch panel customizable on this base module?

A: Resistive or capacitive touch can be customized without new shell molds.

Q4: How many pins does the FPC ribbon cable have?

A: 10PIN ultra short compact SPI cable, saves PCB layout space.

Q5: What is the total thickness of this wearable LCD module?

A: Overall thickness only 1.5mm, ideal for ultra-narrow wearable housings.

JGT099W10ON01 is a 0.99 inch ultra-thin IPS vertical wearable TFT screen, featuring IPS full viewing angle, 400cd/m² high brightness, GC9D01 driver, 3/4 wire SPI 10PIN FPC, 2.8V low power and 1.5mm slim profile. It’s widely used for smart bands, TWS earbud boxes, miniature testers and MCU boards, with open-source firmware, spot stock and custom touch support for sample & bulk orders.